Protecting Your Investment
For maximum service from your rod holders and bases we
recommend periodic cleaning of the threads. Spray with WD-40.
FOR SALTWATER APPLICATIONS, ALL MODELS AVAILABLE WITH STAINLESS STEEL STEMS AND NUTS.
Turn Your Boat Into A Fish Catching Machine...
With Driftmaster Trolling Systems
Mounting stems clamp to tube so you can mount to any width boat, up to 8 feet.
1/2" mounting stems fit any Pro Series Base
T-5000-8 Deep Trolling With Down Riggers
12" Tall X 1 1/2" Diameter Aluminum Tube
3" Square Stainless Flush Base
Mounts Permanently To Boat
With (4) 1/4" Stainless Screws
Available From 2 - 8 Feet Long, Last Digit Of Part Number Indicates Length (8 Foot Version Shown)
12" Tall Vertical Stems
Removes From Boat In Seconds
Use With Round Rail Clamp Bases For Infinite Rod Angle Adjustment
Custome Sizes Available
Can Be Made To Fit Existing Tube Holders
Call 803-473-4927 For Details
T-5100
3/8" Stainless Rod Runs Through Assembly And Screws Into Flush Base. Tightens On Top With Wing Nut
T-5000
1" Diameter X 16 Guage Stainless Tube
Use 215-B Clamp Bases And #210-HLi'l Pro Rod Holders
Or 205-B Calmp Bases And #200-H Pro Rod Holders
Available From 2 - 8 Feet Long, Last Digit Of Part Number Indicates Length (8 Foot Version Shown)
1/2" Diameter Vertical Stems Fit Any Pro Base, So You Can Mount It To The Deck, Gunnels, or Existing rails
Use With Round Rail Clamp Bases For Infinite Rod Angle Adjustment
Custom Sizes Available
1" Diameter X 16 Guage Stainless Tube
Use 215-B Clamp Bases And #210-HLi'l Pro Rod Holders
Or 205-B Calmp Bases And #200-H Pro Rod Holders
All Racks up to 8 feet are one piece and ship via Fed Ex
"This 31 lb. Striper hammered the bait hard; the Troll Master didn't even quiver! Great Bar! Great Rod Holders! Thanks Alot!" . . . . . Chris
Flush Mount T-Bar #T-150- Fully adjustable rod angle
- Fits into flush mount rod holders
- Fully adjustable rod angle
- Designed for trolling or bait fishing
- Adjusts to 2 positions: troll to rear or
drift to side of boat
- Requires two 215B Li'l Pro
or 205B Pro bases
- Bases and rod holders sold separately
Captain Mack With A Georgia Red
Tube Style Rod Holders On Center Consoles Now Have A Purpose! To Hold A Driftmaster!
T-5000 Troll Pro
T-5100 Troll Master
T-6000 Series Troll King Available Direct Call 803-473-4927
Mount (2) plates (10" X 3" X 3/8") permenantly to boat.
Vertical stems attach to plates and are easily removed when not in use.
The Troll King can be equipped with Pro Duo rod holders with 'lock sprocket" to eliminate the need for left threads. Purchase the locking rod holder and Troll King rod holder plates to rig your system with as many rod holders as you need for the way you fish.
#T-6000-LRH $59.00 each
consist of (1) locking Duo Rod Holder
(1) lock sprocket, and (1) Star Base and (1) clamping plate to attach to Troll King
T-6100 Can be mounted on single tubes that fit into existing tube style holders common on many boats.
To adjust locking rod holders left to right; unscrew flange nut, then lift lock sprocket and turn rod holder to desired location. Then, lower lock sprocket so that it engages the star base and tighten flange nut. You can also refer to the lock sprocket instructions on the spider rigging page of this web site.
The Troll King is twin stainless steel 1" tubing held parallel to each other by the mounting plates and rod holder plates. This system is stronger than any system we've made and remains easily removable for storage. It's all aluminum and stainless for use in fresh or salt water. Available in 12", 18" or 24" heights
Pricing:
T-6200 has twin mounting stems on each end.
T-6200 up to 8 feet long 12" high: $399.00
T-6200 18" high: $439.00
T-6200 24" high: $479.00
T-6100 has single tube mount for tube style holders.
T-6100 up to 8 feet long 16" tall: $439.00
Order T-6000-LRH rod holders separately
Available Direct: Call 803-473-4927
T-6100 With single tube gimble mounts
T-6200 with twin mounting stems on each end is the strongest mount.
Phillip Gentry With A South Carolina Flounder
Rod Holders Lock In Position
New Design!
Offsets top bar for ease of reach and easier mounting
T-500 'Big Fish' T-Bar System
Sometimes you just don't have room to mount a "H" frame trolling rack like our T6000, T-5100, or T-5000 systems. We are now offering a heavy T-bar system for big fish. The T-500-H will allow you to put a 'two rod' system in tight places on your boat. Like all of our systems, it's easily removed when not in use. The T-500-H includes locking pins on the top bar to secure your rod holders in an upright position. The Pro Series Duo rod holders will provide two rod angles in the 'locked' position. Slide the clamp bases inward, disengaging the lock pins, for unlimited rod adjustment. The T-500 is one more option Driftmaster offers for you to customize your fishing platform.
T-500-H Big Fish T-Bar
12" Tall X 16" Wide
Includes (2) #255-H Duo Rod Holders
(2) #205-B 1" Pro Clamp Bases
Mounts to #T250-B Base
3" Square Flush Stainless
US Patents # 7,640,692 B1 and #6,487,813, B2
and 6,213,441 B1
US Patent # 7,640,692 B1
US Patent # 7,640,692 B1
PRETECTED BY US PATENT #'S
6 213 441 B1 AND 7 640 692 B1
